Caring for your materials handling equipment means caring for your business. The machineries you use, such as lift and tilt tables, make your production or moving processes easier and faster. That’s why you need to keep them in good working condition.

Proper use and maintenance are keys to making these pieces of equipment as efficient and reliable as possible. Read on to find out how you can effectively do this.

Give Them a Break

Machines can work continuously, but they also have limitations. They may start malfunctioning or overheating if you don’t give them time to cool down. Moving parts tend to wear due to continuous operation without proper lubrication. Set specific operating hours to avoid downtime caused by equipment failure. Ask every operator to shut down the machineries properly after use. Don’t forget to check them for potential problems before and after using them.

Stop, Look, and Listen

Early detection and prevention are the best ways to deal with mechanical issues on your handling equipment. Take time to check the units for possible damage on moving parts, belts, gears, and bolts and nuts. Any small issue may get worse if not addressed immediately. Listen to the sound produced by the equipment. Does it sound unusual? If yes, there might be something wrong. Call your resident mechanic or engineer to do an inspection.

Repair and Replace

Repairing is fine, but sometimes, replacing is a better option. A standard rule is to repair if possible and replace if necessary. You can save little amount by taking small problems for granted, but you’ll lose a larger sum when it causes severe damage and downtime in the future.

Use them Right

Improper use of equipment can cause malfunctioning, accidents, and injuries. Make sure your workers know how to operate those machines in your plant or warehouse. Provide them with trainings, especially if you’ve just upgraded or replaced some of your equipment.

The life of your equipment depends on how you use and maintain them. But don’t forget about the quality. Buy only from reputable manufacturers and distributors to ensure durability and reliability of your industrial handling equipment.

Construction and building sites require heavy lifting. To get the job done, certain equipment is needed to be in place. This is where vacuum lifters come in. 

Vacuum lifters are lifters that help pick up heavy loads such as heavy steel and metal up in a construction site. Such lifters work by creating a suction to pick up heavy material so that they can be transferred smoothly and easily from one place to another. These lifters can pick up slabs, blocks, and other materials. 

Vacuum lifters can make the job of construction workers much easier. It is only natural they become staple in every work site. Here are some things to consider when you are planning to hire lifting equipment such vacuum lifters:

Right cost

The right cost should be considered in getting a vacuum lifter. Do some research and compare the pricesoffered by various vendors.The most reasonable price should be chosen so that the cost of production is comparatively low and thus,make your profit high.

Quality

Vacuum lifters should be of high of quality so that the people working are not put to risk. Since you’ll be working with heavy materials, the vacuum lifters you use must be able to withstand the pressure while keeping you from danger. 

Referrals

Get referrals before ordering a vacuum lifter. Referralsassure you that the equipment and its providerare reliable. Since your referrals may have already used thisequipment,you can be sure about its performance. This also helps you compare prices among the service providers.

Lifting of heavy articles is a difficult yet essential job in any construction or an engineering site. This can be avoided by taking simple preventive steps. Make sure you are using reliable tools such as telehandler attachments and lifting tools to minimize accidents while increasing your productivity.